4FT Baseboard Heater Cover with Left and Right End Covers,Galvanized Steel Material That is Easy to Install,Used for Replacing The Old Bottom Plate Heating Cover

The floor heating cover includes: a 4FT galvanized steel floor heating cover and left and right end covers, as well as two wall connection pieces, allowing you to easily replace the old floor heating cover without having to purchase the end covers and wall connection pieces separatelyGalvanized Steel Material: The entire heating cover (including the left and right end covers and the wall connection parts) is made of galvanized steel material. Even when exposed to the air, it can achieve aesthetic appearance, wear resistance and corrosion resistance, and has a longer service lifeEasy to Install: After removing the old floor heating cover, place our new floor heating cover on the heating element and then fasten the left and right end covers. (If you are worried that it may not be firm enough, you can use the provided wall connectors to fix the heating cover.)Tip: The distance from the bottom plate to the top of the heating cover should be between 7 and 1/2 inches and 9 inches. The distance from the bottom of the heating element to the top of the back plate should be between 5 inches and 6 to 3/4 inches. The width from the back plate to the front of the heating element should be less than 3 to 1/4 inches

• The floor heating cover includes: a 4FT galvanized steel floor heating cover and left and right end covers, as well as two wall connection pieces, allowing you to easily replace the old floor heating cover without having to purchase the end covers and wall connection pieces separately
• Galvanized Steel Material: The entire heating cover (including the left and right end covers and the wall connection parts) is made of galvanized steel material. Even when exposed to the air, it can achieve aesthetic appearance, wear resistance and corrosion resistance, and has a longer service life
• Easy to Install: After removing the old floor heating cover, place our new floor heating cover on the heating element and then fasten the left and right end covers (If you are worried that it may not be firm enough, you can use the provided wall connectors to fix the heating cover)
• Tip: The distance from the bottom plate to the top of the heating cover should be between 7 and 1/2 inches and 9 inches. The distance from the bottom of the heating element to the top of the back plate should be between 5 inches and 6 to 3/4 inches. The width from the back plate to the front of the heating element should be less than 3 to 1/4 inches